| 23120C NSK Railway Rolling Spherical Roller Bearings | Reference speed:7500 r/min; Calculation factor kr:0.2; D1 ≈:85.7 mm; Da max.:91.4 mm; da min.:63 mm; d:55 mm; ra max.:1.5 mm; Axial load factor Y:0.4; r3,4 min.:1.1 mm; r1,2 min.:1.5 mm; Basic dynamic load rating C:114 kN; db min.:73 mm; B:25 mm; F:66 mm; Limiting speed:8000 r/min; D:100 mm; Limiting value e:0.3; d1 ≈:70.8 mm; Basic static load rating C0:118 kN; Fatigue load limit Pu:15.3 kN; |
| 23126C NSK Railway Rolling Spherical Roller Bearings | Basic static load rating C0:88 kN; Basic dynamic load rating C:42.9 kN; Fatigue load limit Pu:10.6 kN; Reference speed:6700 r/min; Fw:60 mm; Mass needle roller and cage assembly:0.13 kg; Ew:68 mm; U:30 mm; Limiting speed:7500 r/min; |
| 22228M NSK Railway Rolling Spherical Roller Bearings | d:440 mm; Pu:5600 kN; B:226 mm; Static (Cor):22.3 mm; Grease:10640 kN; D:720 mm; Dynamic (Cr):12 mm; rs (min):6 mm; with cylindrical bore:430 min-1; Oil:765.770 kN; with tapered bore:530 min-1; |
| 22324C NSK Railway Rolling Spherical Roller Bearings | Insert Bearing IB:ZMaRC; Dimension L:108.0 mm; Dimension A2:15.1 mm; Height T:42.2 mm; Weight W:1.20 kg; Basic Dynamic Radial Load Rating C:19500 N; Dimension A1:32.5 mm; Shaft Diameter D:30 mm; Dimension DA:93.7 mm; Distance J:82.6 mm; Diameter N:12.7 mm; Basic Static Radial Load Rating Co:11200 N; |
| 228708C NSK Railway Rolling Spherical Roller Bearings | Basic Dynamic Radial Load Rating C:50700 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3200 rpm; Basic Static Radial Load Rating Co:41500 N; Accessories:Two Shields; d:80.000 mm; Grease Speed Rating Open/Shielded n1:5300 rpm; Oil Speed Rating Open/Shielded n2:6300 rpm; B:22.00 mm; D:125.0000 mm; |
| 23220C NSK Railway Rolling Spherical Roller Bearings | d:7 mm; B:12 mm; r, r1,2 min.:0.3 mm; F:10 mm; Mass inner ring:0.0036 kg; |
| 231255C NSK Railway Rolling Spherical Roller Bearings | Hydraulic nut:HMV 134 E; A:9 mm; B1:330 mm; d:630 mm; d1:600 mm; G1:40 mm; B2:356 mm; G:Tr 670x6; Mass withdrawal sleeve:101 kg; G2:G 1/4; |
| 23128C NSK Railway Rolling Spherical Roller Bearings | Stabilizing ring:SR-17-14; P90°:55.6 kN; Cap bolt recommended tightening torque:298.3 N·m; Appropriate attachment bolt size G:0.625 in; N1:19.05 mm; J max.:295.275 mm; S:4.763 mm; R2:22.225 mm; L:330.2 mm; PosiTrac Plus contact element (db shaft position):B10724-64; Initial grease fill:110.56 g; dc:66.675 mm; H2:33.337 mm; Pa:24.5 kN; PG:1/8 NPT; End plug (suffix Y):EPR 8; PosiTrac Plus contact element (dc shaft position):B10724-44; |
| 22328 NSK Railway Rolling Spherical Roller Bearings | l3 min.:85 mm; d4 ≈:105 mm; w:90 mm; G:M 64x4; l7 min.:90 mm; r1 min.:1 mm; l4 max.:324 mm; h1:230 mm; Basic static load rating C0:655 kN; Material constant KM:330; Mass rod end:15 kg; α:5 °; Basic dynamic load rating C:400 kN; d2 max.:182 mm; l5 ≈:45 mm; dk:105 mm; Specific dynamic load factor K:100 N/mm²; B:55 mm; d:80 mm; C1 max.:48 mm; |
| 23228C NSK Railway Rolling Spherical Roller Bearings | P120°:64.9 kN; P90°:105 kN; A2:222.25 mm; J max.:333.375 mm; Max. speed for Taconite seal:725 r/min; A1:111.125 mm; ba:46.831 mm; RG:3/8 NPT; J1:60.325 mm; Taconite seal:TER 112; P60°:175 kN; Pa:16.7 kN; L:387.35 mm; Cap bolt:5/8-11 UNC; H1:114.3 mm; Appropriate attachment bolt size G:0.75 in; Mass pillow block:39 kg; Da:180 mm; J min.:295.275 mm; P180°:71.2 kN; |
| 231481C NSK Railway Rolling Spherical Roller Bearings | Fillet Radius ra:2.00 mm; B:35.00 mm; Basic Dynamic Radial Load Rating C:125000 N; Accessories:One Shield; Sealed Speed Rating n3:1700 rpm; d:150.000 mm; Grease Speed Rating Open/Shielded n1:2600 rpm; Oil Speed Rating Open/Shielded n2:3200 rpm; D:225.0000 mm; Basic Static Radial Load Rating Co:125000 N; |
| 230906C NSK Railway Rolling Spherical Roller Bearings | Specific static load factor K0:200 N/mm²; Specific dynamic load factor K:140 N/mm²; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.08; d:152 mm; Effective load carrying cross section A:17700 mm²; B:120 mm; Mass bushing:0.83 kg; Coefficient of friction µ min.:0.03; D:165 mm; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; Tolerance shaft:h8; |